| QM INDUSTRIES DVF15K207SEC Flange Block Bearings | ra max:1.5 mm; Min operating temperature, Tmin:-20 °C; Fatigue limit load, Cu:2 kN; Mass:1.07 kg; Nlim (grease):5,100 rpm; Characteristic outer ring frequency, BPF0:4.1 Hz; Max operating temperature, Tmax:120 °C; Characteristic rolling element frequency, BSF:5.4 Hz; Characteristic inner ring frequency, BPFI:5.9 Hz; Dynamic load, C:62 kN; |
| QM INDUSTRIES QAATU18A308SN Take Up Unit Bearings | G:1/4-28UNF; Weight:0.21 kg; C:16 mm; SW:3.18 mm; T min.:-20 °C; B:31 mm; m:4.7 mm; Recommended tightening torque for set screw:3.7 Nm; S:12.7 mm; T max.:100 °C; |
| QM INDUSTRIES QVMC22V100SEC Cartridge Unit Bearings | Characteristic rolling element frequency, BSF:6.41 Hz; Y0:1.96; Characteristic inner ring frequency, BPFI:10.92 Hz; Max operating temperature, Tmax:200 °C; rs min:4 mm; B:144 mm; Mass:77.2 kg; Static load, C0:3,830 kN; da min:237 mm; Da max:383 mm; |
| QM INDUSTRIES QMCW18J307SEB Flange Block Bearings | H2:64 mm; B:34 mm; Designation of closed end cover:SCCE204; s1:30.5 mm; C0:6.65 kN; d:17 mm; H1:9 mm; Weight:0.63 kg; C:12.8 kN; A:32 mm; |
| QM INDUSTRIES QVVF11V050ST Flange Block Bearings | Dynamic load, C:222 kN; Inventory:0.0; D:130 mm; ra max:2 mm; Characteristic outer ring frequency, BPF0:5.21 Hz; Characteristic inner ring frequency, BPFI:7.79 Hz; Nlim (oil):5,200 rpm; rs min:2.1 mm; F:77 mm; da max:75 mm; |
| QM INDUSTRIES QAAFXP18A085SC Flange Block Bearings | Fatigue limit load, Cu:0.09 kN; Da max:24 mm; Nlim (grease):21,000 rpm; Characteristic rolling element frequency, BSF:3.47 Hz; Dynamic load, C:4.55 kN; Characteristic cage frequency, FTF:0.37 Hz; rs min:0.3 mm; D:26 mm; da min:12 mm; Characteristic inner ring frequency, BPFI:4.44 Hz; |
| QM INDUSTRIES TAFC26K408ST Flange Block Bearings | d:31.75 mm; S:17.5 mm; T max.:200 °C; A1:27 mm; T min.:-20 °C; E:22 mm; A:48 mm; s1:21.45 mm; Recommended tightening torque for set screw:8 Nm; H:47.6 mm; |
| QM INDUSTRIES QVFY26V110SET Flange Block Bearings | Bearing Duty:Normal Duty; Max Bearing Speed:7500 rpm; Flinger Material:Steel; Ball Material:Steel; Base to Center Height:Standard; Shaft Attachment (2):Set Screw; Bearing Insert Material:Steel; Ship Weight:1.5 LB; Housing Material:Cast Iron; Bearing Inner Ring Material:Steel; |